Christie Digital Vista X5 XGA 5000 Ansi Lumens DLP Video Projector
OVERVIEW
- Christie Digital Vista X5 HDTV Video Projector
If image is everything to you, then the new Vista X5 has everything you need. More than
1 billion displayable colors can be re-created to project the most resplendent and striking
visuals, courtesy of the very latest in 3-chip DLP™ technology.
A 13-bit user selectable gamma
table combines 5,000 ANSI lumens of bright light, to deliver pixel perfect color accuracy.
The Vista X5 uses a CERMAX® Xenon illumination system to ensure the same color and
brightness uniformity is delivered time after time, after time.
The Vista X5 shares a common
modular architecture with all the other models in the Vista range. If your projection
needs change, your Vista X5 projection system can change to meet them. The X5 can be upgraded
at only an incremental cost and deliver stunning true SXGA resolution images.
Compatible with the widest
range of sources and supported by a complete range of both fixed and zoom lenses. And
because the Vista X5 has such tremendous lens offset (in both lens directions), the Vista
X5 can present all your material to stunning effect for a variety of fixtures and installations.
The Vista X5 is brimming with
features that make for both simple and complete control of your presentations. Furthermore,
the Vista X5 offers reliability and serviceability second to none. So the Vista X5 makes
your images look great, but makes you look even better.
FEATURES
- christie digital vista x5 hdtv video projector
5000 ANSI lumens
True XGA resolution (1024
x 768)
Vertical & horizontal
scaling
Electronic keystone
Modular architecture
Inexpensive upgrade path
Upgradeable to true SXGA
resolution
Advanced inverse telecine
digital processing
Superior image quality
Xenon illumination system
LiteLOC™ Light Output
Control
Low noise level
Intuitive graphical user
interface
Wide array of optional
lenses
PERFORMANCE
DATA AND SPECIFICATIONS
Brightness
5000 ANSI
lumens
Over 90% brightness
uniformity across the screen
Contrast Ratio
(1.5-2.2:1 zoom lens)
350:1 ANSI;
500:1 On/Off
Resolution/Digital
Processing
3 chip 0.9"
DMD™ (Digital Micromirror Device) system
True XGA 1024x768
chip resolution
13 bit user
selectable gamma table
More than
1 billion displayable colors
Dynamic Scaling
Resizing capabilities
to scale down from 1600x1200 and up from 640x480 to the XGA resolution
of the DMDs
Independent
horizontal and vertical size adjustment for graphics and video inputs
Horizontal Frequency
Range
15 to 120
kHz
Vertical Frequency
Range
24 to 120
Hz
Field Interchangeable
Optional Lenses
Fixed short
throw lens 1.2:1
Zoom lenses:
1.5-2.2:1, 2.2-4:1 and 4-7:1
Up to 130%
of vertical lens offset for off-axis projection
Up to 80%
of horizontal lens offset
Compatibility with VistaGRAPHX lenses: 0.8:1, 2.5-4:1, 4-7:1 (adapter
required)
Screen size
5' to 40' (1.5m to 12.2m) diagonal
Lens Mount
Manual horizontal
and vertical lens offset, focus and zoom adjustments
Lens "bayonet-style"
insertion system
Lens mount
tilt adjustment
Built-in light
shutter
Inputs
Built-in RGB/YUV/YPbPr
inputs allowing separate H and V syncs, composite sync and sync-on-green/luma
(5 BNC connectors)
Multi-standard
Video Decoder Module (NTSC 3.58, NTSC 4.43, PAL, PAL 60, PAL M, PAL N,
SECAM) with one composite video input (BNC and RCA connectors) and one
S-video input (two BNC and 4-pin mini-DIN connectors)
Built-in Audio
Control Module with 4 stereo audio inputs and 1 stereo output (RCA connectors)
Slot for an
optional input module
Full compatibility
with Marquee Signal Switcher and third-party switchers
HDTV/DTV Compatibility
Full HDTV/DTV
compatibility on analog RGB/YPbPr inputs
Accepts 480i,
480p, 576i, 720p, 1035i, and 1080i formats at all applicable frame/field
rates
Accepts 1080p
at 24, 25 and 30 Hz frame rates
Optional HDTV
Serial Digital Input Module
Various Keypads
Standard hand-held
IR backlit remote keypad, front and rear infrared sensors
Built-in backlit
keypad
Optional RS422
two-way remote controller with LCD display using 6 pin XLR connector with
range of 600 ft (183 m)
Optional wired
backlit remote keypad with 3 pin XLR connector
Control/Networking
Third party
control system and switcher compatibility
Dual RS232
ports for computer control, with loop through for connection of multiple
projectors
Dual 6 pin
XLR RS422 ports for connection of optional LCD two-way controllers and
loop-through to multiple projectors up to 600 ft (183 m)
Diagnostics
Built-in LCD
diagnostic display indicates operational status and error messages
Power and
Status LED
Full diagnostics
through RS232 9 pin D connector
Graphical User
Interface
Auto Set-up
feature
"Direct
Access" intuitive user interface for complete projector control in
5 world languages
On screen
user movable menus to fit different image aspect ratios (4:3, 5:4, 16:9,
etc.)
On screen
help menus
100 channel
memories
Auto power
feature
Lamp Specification/Color
Temperature
1200W CERMAX®
Xenon illumination system
Pre-aligned
lamp module
Constant color
temperature over the lamp life
Color temperature
adjustment range: 3200 K to 9300 K
User replaceable
lamp within 5 minutes
Typical lifetime:
1000 hours
Variable Lamp
Power Supply/Light Output Control (LiteLOC)
"Auto-brightness"
mode to maintain constant brightness over time
"Lamp
Conserve" mode to extend the lamp life
"Max
Brightness" mode for maximum light output
Power Requirements
Line voltage
220VAC to 240VAC +/- 10% @ 50/60 Hz
Power consumption:
1700 W maximum
Thermal dissipation:
5840 BTU/hr.
Operating
current: 8.5A maximum
Weight and Size
39.9 kg (88
lbs)
64.8cm (W)
x 76.7cm (L) x 30.2cm (H); 25.48" (W) x 30.19" (L) x 11.88"
(H)
Standard Accessories
IR remote
keypad with batteries
User's Manual
with warranty card
2.44m (8 ft)
line cord
Optional Accessories
Serial Digital
input (SMPTE 259M/CCIR 601) with loop through feature
Digital HDTV
input module (with loop through feature) compatible with all known HDTV
formats
