CELABS AV400COMP
1 Input/4 Output HDTV Component
Video Distribution Amplifier / Splitter / Signal Booster
KEY
POINTS -CELABS AV400COMP Component
Video Distribution Amplifier:
1-Input & 4-outputs
No signal loss
low distortion
True one-to-one ratio
Unity gain & Cascadable
Metal housing reduces interference
Save the expense of additional digital receivers
Improves display picture quality
Loop or cascade to unlimited number of televisions with equal
picture quality
(Daisy Chain)
Allows up to 150ft. runs
SUMMARY -Ce Labs Av400comp Component
Video Signal Booster:
The AV400COMP from CE Labs distributes HDTV and analog television signals from a
single A/V source to multiple television receivers. Now you can daisy chain to large number of televisions with equal picture
quality. The AV400COMP saves the expense of additional A/V receivers and allows up
to 150 ft. runs.
DETAILED SPECS -CELABS AV400COMP COMPONENT VIDEO DISTRIBUTION AMPLIFIER:
Video
Gain: 2 Volt
unterminated, 1 Volt Terminated: 75 ohms + 5%
Input
Impedance: 75 ohms + 5%
Output
Impedance: 75 ohms + 5%
Video
Insertion Loss: 50 Hz to 10 MHz < .40 dB
In to Out
Isolation: 50 Hz to 10 MHz 32 dB Port to Port
Out to In
Isolation: 50 Hz to 10 MHz 60 dB
Return Loss:
50 Hz to 10 MHz 20 dB
Video
Bandwidth: > 100 MHz
Audio
Response: > 100 KHz
Audio
Gain: Unity
Input
Impedance: 22k ohm
Output
Impedance: 1k ohm
THD: 0.05% at
1.0 Volts input level
Frequency
Response: 20 Hz to 100 KHz
Channel
Separation: > 75 dB @ 1 KHz
In to Out
Isolation: 60 dB
Out to Out
Isolation: 60 dB
Signal to
Noise: 100 dB re 2 Volts (out)
Power
Requirement:
External 9 to 10 Volt AC @ 500 mA with a 2.1 mm coaxial connector. Power supply
is included.
