KEY
POINTS - Celabs CAT5RX HD
Over LAN CAT5 Audio/Video Receiver:
Cable length equalizer for long distances
Video continuity LEDs to ensure all signals are transmitting
IR port
SUMMARY -Celabs cat5rx HD
Over LAN CAT5 Audio/Video Receiver:
Distribute high definition component or composite video and digital or left or right audio over extended distances using CAT5 wire. Video & audio loop output to accommodate future expansion to additional CAT5 transmitters and receivers.
DETAILED SPECS -CELABS CAT5RX CAT5
DISTRIBUTION AMPLIFIER:
Video
Nominal Input Level: 1 Volt peak to peak
Gain: 1 Volt into 75 ohms (2 Volts unterminated)
Input Impedance (CAT5 TX): 75 ohms
Output Impedance (CAT5 RX): 75 ohms
Isolation port to port: > 65 dB
Isolation out to input: > 80 dB
Return loss: > 30 dB
Video bandwidth: > 50 MHz (HDTV requires 37 MHz min.)
Distance: 300 feet @ 1080i (500 feet with CAT6 cable)
3 composite video signals may be substituted on the individual component
video inputs (1000 Ft. max). Audio (Analog)
Nominal Input level: 1 Volt peak to peak
Gain: Unity (slightly reduced at max cable length)
Input Impedance: 22k ohm
Output Impedance: 1k ohm
Frequency Response: 20 Hz to 20 KHz
Signal to Noise: 80 dB @ 1 Volts out
Audio (Digital)
Supports standard SPDIF digital audio
Power
Requirement: External 9 or 10 Volt AC @ 600 mA with a (2.1 mm center)
Coaxial connector.
Dimensions (W x H x D): 4 3/8" X 3 1/2" X 1"
Weight: 1.95 lbs
NOTE: Composite video may be used for security or with standard monitors
