KEY
POINTS -Celabs CAT5TX HDTV Audio/Video Transmitter over
LAN CAT5 Cable with 2 Outputs:
Active amplification ensures high quality transmission
Loop output for use of additional CAT5 transmitters
Two CAT5 outputs for additional location
Discrete passive IR channel for the use of external
IR remote control systems
SUMMARY -Celabs cat5tx HDTV Audio/Video Transmitter over LAN CAT5 Cable with 2 Outputs:
Distribute high definition component or composite video and digital or left or right audio over extended distances using CAT5 wire. Video & audio loop output to accommodate future expansion to additional CAT5 transmitters and receivers.
DETAILED SPECS -CELABS CAT5TX
LAN CAT5 DISTRIBUTION AMPLIFIER:
Video
Nominal Input Level: 1 Volt peak to peak
Gain: 1 Volt into 75 ohms (2 Volts unterminated)
Input Impedance (CAT5 TX): 75 ohms
Output Impedance (CAT5 RX): 75 ohms
Isolation port to port: > 65 dB
Isolation out to input: > 80 dB
Return loss: > 30 dB
Video bandwidth: > 50 MHz (HDTV requires 37 MHz min.)
Distance: 300 feet @ 1080i (500 feet with CAT6 cable)
3 composite video signals may be substituted on the individual component video inputs (1000 Ft. max) Audio (Analog)
Nominal Input level: 1 Volt peak to peak
Gain: Unity (slightly reduced at max cable length)
Input Impedance: 22k ohm
Output Impedance: 1k ohm
Frequency Response: 20 Hz to 20 KHz
Signal to Noise: 80 dB @ 1 Volts out
Audio (Digital)
Supports standard SPDIF digital audio
Power
Requirement: External 9 or 10 Volt AC @ 600 mA with a (2.1 mm center) Coaxial connector.
Dimensions (W x H x D)
6" X 3" X 1 1/2"
Weight
1.95 lbs
NOTE: Composite video may be used for security or with standard monitors
