With a wide aspect ratio and high resolution of 1280 x 768 pixels (wide-XGA),
the NEC LCD4000 enables onlookers to clearly view optimized text and images.
The high brightness levels of 450 cd/m2 allow the monitor to achieve a
typical 600:1 contrast ratio, thereby producing rich, vibrant colors. To
accurately deliver full motion video without the appearance of ghosting or
image trailing, the NEC LCD4000 operates at a Rapid Response time of 23 ms.
Unlike phosphor-based public displays, images do not become permanently
engraved into the NEC LCD4000 screen after long periods of time.
To enable users to easily access and modify display settings, the NEC
LCD4000 utilizes an RS-232 connector or the advanced remote diagnostics and
control capabilities can be accomplished directly off of the VGA connector
through use of the Display Data Channel/ Command Interface (DDC/CI). This
advanced monitor intelligence allows control commands to be sent directly to
the monitor through a standard PC system or remotely over an existing
network (LAN) by a system administrator. The NEC LCD4000 also includes
CableComp technology, which enables IT administrators to utilize long
cables of up to 326 feet/100 meters to service, upgrade and repair the unit
from a central control room. The NEC LCD4000 can also be easily adjusted
with a touch of the controls on the front of the display, which activates an
expanded display mode through the OSM (On Screen Manager).
Nec LCD4000
40 inch Flat Panel Monitor Specifications:
LCD Panel: Active
matrix TFT (40 inch VIS / 102cm diagonal)
Viewable Size:
871.68 mm (H) x 523.01 mm (V)
Pixel Pitch: 0.681
mm
Native Resolution:
1280 dot x 768 line
Viewing Angle: Up 85
/ Down 85 / Left 85 / Right 85 (typ.) @ CR>10
Brightness: 450 cd/m2
(Typ.)
Contrast Ratio:
600:1 (typ.)
Colors: over 16
million (dependent on video card)
Input Terminals: PC: Analog RGB x 1(BNC x 5), Mini
D-Sub 15 Pin x 1, DVI-D x 1
Video: BNC x1 and RCA x 1 or S-Video x 1 Component x 1 (BNC x 5)
Audio: RCA L/R x 2, Stereo Mini Jack x 1(PC)
Control: RS232C x 1
Output Terminals: PC: Analog RGB x 1(BNC x 5)
Video: BNC x1
External Speaker: Speaker Terminal L/R x 1
PC Input: Frequency Range: Horizontal : 31.5k
- 49.0kHz/64.0kHz(SXGA)/75.0kHz(UXGA)
Frequency Range: Horizontal (Digital): 31.5k - 48.4kHz
Frequency Range: Vertical : 58.0 - 62.0 Hz
Frequency Range: Vertical (Digital): 58.0 - 62.0 Hz
Video Signal: Analog 0.7 Vp-p / 75 ohm
Sync Signal: TTL Level (Pos./Neg.), Input Impedance 2.2K ohm
Video Input:
NTSC/PAL/SECAM Composite, Separate (S-Video), Component (Correspondence with
HDTV)
Control Input:
RS-232C
User Control:
Wireless Remote Control: Power, Volume, Mute, Menu, PiP, Still, etc
Monitor: Main Power, Exit, Up, Down, Volume(-,+), Input, Mute, Power
Power Supply: Input Voltage: 100 - 120V, 220 -
240V 50/60 Hz
Current Rating: 2.35A @ 100 - 120V, 1.05A @ 220 - 240V
Power Consumption: On 235W, Active Off less than 5W, Off 0W
Main Function: Correspondence with HDTV - High
quality for DVD
PiP ( Possible to change between Main screen and Sub regarding Video and
PC)*
Still(Main screen)*
High sound adjustment, Low sound adjustment
CableComp - Cable Length Compensation
Ease Compressed regarding SXGA and UXGA**
Auto Set Up, Auto Adjustment***
OmniColor - Natural Color Matrix***
Correspondence with sRGB***
*3 kinds of size to change
**only select PC by analog
***only select PC
Complied Regulatory and Guidelines: UL 1950, CSA C22.2 No.950, TUV-GS,
EN60950, FCC-B, DOC-B, EN55022-B, EN55024, EN61000-3/2, EN61000-3-3,
CE-Marking
Dimensions: Net without stand:
37.4" (W) x 23.8" (H) x 5.6" (D)
949 mm (W) x 605 mm (H) x 141 mm (D)
Net with stand:
37.4" (W) x 25.4" (H) x 12.2" (D)
949 mm (W) x 644 mm (H) x 311 mm (D)
Weight: Net without stand: 57.3 lbs. / 26
kg
Net with stand: 60.6 lbs. / 27.5 kg
Gross: 73.9 lbs. / 33.5 kg
Accessories: User's Manual, Wireless Remote
Control, Batteries for Wireless Remote Control, Power Cord (3m) x 1, D-Sub -
D-Sub Signal Cable (4m) x 1, CD-ROM