Mounts and Table Stands for Plasma Displays

page has moved. click here for new page

Draper Plasma Mounts, Table Stands and Accessories

Formed entirely of heavy gauge steel, the Aero T4 ceiling mount enables a plasma display to be installed with the top of the image virtually flush with the ceiling line.

Features a 118" extruded aluminum column with sturdy steel swivel mounts for attachment to ceiling and floor. The C/F3000 will accommodate up to three plasma displays mounted horizontally or two vertically.

Suspends a plasma display from a 19" long extruded aluminum column mounted to a heavy gauge steel ceiling bracket. Display can be raised and lowered on column over a 6" range in 2" increments.

Offers all the features and benefits of the C490 plus a greater vertical extension due to its 45" long extruded aluminum column. Display can be raised and lowered on column over a 6" range in 2" increments.

*Note-C490 and C1150 do not have cable management

Similar in design to the C490, and provides two opposing display mounting brackets. Display can be raised and lowered on column over a 6" range in 2" increments.

Similar in design to the C1150, with two opposing display mounting brackets. Display can be raised and lowered on column over a 6" range in 2" increments.

*Note-CD490 and CD1150 do not have a concealed electrical panel or cable management

Pipe-style ceiling mount allows up to 24" of vertical adjustability in 4" increments. Column has built-in cable management system; all wires/cables are discreetly concealed in the cylinder. Handles displays up to 61" diagonal.

Articulating swivel mount extends the plasma display up to 30" from the wall. the V4 swivels and rotates the display in all directions, limited only by the wall. Formed entirely of heavy gauge steel.

Column attaches to the wall with heavy gauge steel plates. Built-in cable management and a concealed 2 socket electrical panel with power cord and plug. Plasma display height adjustments in 2" increments.

Offers all the features and benefits of the W490. In addition, the plasma display can also be raised and lowered over a 26" range. Either one or two displays can be mounted horizontally or one plasma display vertically.

You can mount up to three plasma displays horizontally, or either one or two vertically. Displays can be raised over a 58" range. When mounted horizontally, plasma display can be tilted up to 15 degrees.

Modern, high-tech look blends in with your plasma display. Less than 25" tall with a footprint of less than 14" x 25".

For mounting of DVD, VCR and other peripherals. Attach securely to column with positive locking clips. Shelf height can be adjusted in 2" increments.

Premier Mounts

Nothing else is needed to mount your plasma TV to a wall, stand, cart or suspension device if you choose our Clevis(TM) CTM series plasma mount. Augmenting our already popular PCM series, the CTM series brings the benefits of the wall-only PCM and adds the versatility of mounting to stands, carts and suspension devices.

Nothing else is needed to mount your plasma TV flat panel monitor to a wall if you choose our Clevis(TM) plasma mount. Clevis makes mounting your flat panel display easy with its unique dual-plate and sliding-rod systems. Designed for horizontal plasma mounting, the Clevis mount's exclusive heavy-duty, 1/2 inch diameter, steel sliding rods support the display, allowing lateral movement for precise horizontal placement.

The Rotamount plasma screen flat panel mount is one of our most innovative designs. With 360 degrees of rotation and 0-60 degrees tilt, it provides the most flexibility for positioning your display. Use it with a length of 1-1/2 inch national tapered pipe or an adjustable-height suspension adapter, and mount your flat panel monitor to nearly any ceiling surface. Locks display in 15-degree increments between full horizontal and vertical positions.

This versatile wall mount now offers a newly incorporated screen leveling feature, allowing pitch and roll to be fine-tuned by hand at any position. Three pivot points allow for an infinite number of viewing positions. When fully retracted, the screen sits *almost flush against the wall, or the articulating arm can be extended to a maximum of 30.5 inches (77.5cm) from the wall.

The tri-pivot swing-out adapter has an elbow joint that allows you to pull the display out straight from the wall, keeping the wall base plate hidden from view in front. Display may be positioned up to 28.853 inches from the wall surface. When fully extended, display can be swiveled side to side up to 180 degrees. Mates with any of our PSM series plasma display mounts.

The swing out/swivel wall mount adapter allows you to pull a plasma display out from the wall up to 22.058 inches, at a 90-degree angle. When fully extended, display can be swiveled side to side up to 180 degrees. Display may be mounted in either horizontal or vertical configuration. Mates with any of our PSM series plasma display mounts.

This protective enclosure covers for outdoor ceiling installations fits various plasma screens. It's a secure enclosure that offers protection from vandalism as well as environmental and weather conditions. This sturdy, steel-frame protective enclosure covers with clear Plexiglas front panel allows you to mount your flat panel monitor in either a horizontal or vertical configuration. Custom degree of ventilation, climate and dust control included.

This protective enclosure covers for indoor ceiling installations fits various plasma flat panel screens. It's a secure protective enclosure that offers protection from vandalism with a sturdy, steel-frame protective enclosure and a clear Plexiglas front panel. It allows you to mount your flat panel monitor in either a horizontal or vertical configuration and offers a tilt feature. Custom degree of ventilation, climate and dust control included.