10-bit, 300 MHz instrumentation-quality DACs, with up to 10x
over sampling and 2X over sampling for 1080p
Full-frame Timebase Correction
High performance, multi-standard video decoders (10-bit: 480i/576i; 12-bit: 480p/576p/720p/1080i)
High-quality super-adaptive comb filter with 2D Y/C separation
Flexible Digital and Analog Audio switching and routing – four digital audio inputs and one analog audio input with two digital audio outputs (both active)
ABT's Precision AV LipSync intelligent digital audio delay technology to match Audio & Video timing
What's the Difference Between the iScan VP30 and iScan VP20 ?
An additional HDMI input (total of 4)
Framerate conversion that allows source-locked 48/72Hz output for film-based sources
Input and Output Aspect Ratio support for non-standard content and displays
Panamorphic / Anamorphic Lenses on front projectors (constant height configurations)
User definable content and display aspect ratio
Analog Component/RGBHV input using high quality BNCs
Analog Component/RGBHV output using high quality BNCs
10-bit, 300 MHz instrumentation-quality DACs with up to 10x over sampling (2x for 1080p)
Display Profiles - For multiple display configurations (10)
Additional test patterns to assist in display calibration
User-definable Output Resolutions between 480p and 1080p (27 Factory Defined Resolutions)
Optional SD-SDI Input Module for the absolute best picture quality from a standard definition digital source that has an SD-SDI output
iScan VP30 Rear Panel View
(Click for Larger Image)
SUMMARY - Dvdo mm603 iScan
VP30 HDTV Video Processor:
The DVDO iScan VP30 is the next generation high-resolution video processor and A/V switcher that sets a new standard for up, down, and cross-converting all of your video sources. Whether it's your 480i cable feed, 480p DVD player, or 720p or 1080i HD set-top-box signal-the iScan VP30 scales your video output to perfectly match the optimum resolution of your display, up to 1080p! Plus, it's HDCP compliant over each of the 4 digital HDMI inputs, and accepts any legacy 480i/480p analog sources. Serving as your complete A/V hub, the iScan VP30 provides simultaneous audio/video switching with "any rez in - any rez out" video conversion and one clean wire to your display. Add the iScan VP30 to your home theater today and prepare to be visually Captivated!
DETAILED SPECS - DVDO MM603 ISCAN
VP30 HDTV VIDEO SCALING PROCESSOR WITH HDMI SWITCHING:
Inputs
Twelve Video Inputs Available
Two Composite (NTSC/PAL/SECAM)
Two S-Video (NTSC/PAL/SECAM)
Two Component (YPbPr or RGB/S) processes 480i/p, 576i/p, 720p, 1080i
One RGBHV/Component (BNC-style connectors) processes 480p, 576p, 720p, 1080i
Four HDMI processes 480i/p, 576i/p, 720p, 1080i
One SD-SDI (Serial Digital Interface) Optional
Nine Audio Inputs
Four HDMI
Two Coaxial Digital
Two Optical Digital
One Analog Pair (L/R)
Outputs
One Analog Video Output
Using High Quality BNC-style connectors
Configurable for YPbPr, RGBHV, RGB/S, or RGB
One Digital Audio/Video Output
Using HDMI (High Definition Multimedia Interface) connector
Configurable for YPbPr or RGB
Also carries digital audio
Two Digital Audio Outputs
One Coaxial Digital
One Optical Digital
Controls
Infrared remote control with direct access codes or manual controls on front panel
Functions accessible via either On Screen Display (OSD) or front-panel LED display
RS-232 port for software downloads and automation
Fully programmable controls for each separate video input with non-volatile memories:
