px50vp1a
NEC PlasmaSync 50PD1 50 inch Plasma Screen
The
new NEC 50PD1 is the first affordable 50” plasma monitor for public
display. With up to XGA resolution and special features such as
AccuShield™ Phosphor burn reduction, built-in matrixing, and high
brightness, its the perfect public display solution.
Very bright - 330 cd/m 2 brightness for visibility under all
lighting conditions
Phosphor
burn reduction-AccuShield™
phosphor protection reduces the risk of phosphor burn
Built-in
video wall capability-
Create a 100” diagonal 2x2 matrix with no external hardware
or software
RGB 1 (analog) 15-pin mini D-sub
RGB 2 (analog) 5 BNC (RGB/HV) w/loopout
RGB 3 (digital) 29-pin DVI (Digital RGB input only)
Video 1 Composite BNC w/loop out
Video 2 S-Video 4-Pin DIN w/loopout
External Control 15-pin mini D-Sub w/loopout
(RS232 & Contact Closure)
Input
Terminals
RGB
1(analog) 15-pin mini D-sub
RGB 2(analog) 5 BNC (RGB/HV)
RGB 3(digital) 29-pin DVI (digital only)
Video 1 Composite RCA x 1
Video 2 Composite BNC x 1
Video 3 S-Video 4-Pin DIN
HD Video1 1 set RCA Component (Y,Pb,Pr/Y,Cb,Cr)
HD Video2 1 set BNC Component (Y,Pb,Pr/Y,Cb,Cr)
User
Controls
Front Bezel Power on/off, input selection, OSM access
(Control Lock switch located on input panel)
Remote Control Power on/off, input selection, OSM access,
picture position, contrast, brightness, color,
tint, sharpness, reset, ID select
OSM Picture adjust, fine picture, color
temperature, white balance, OSM position,
source information, reset, picture size, picture
position, contrast, brightness, gamma, color,
tint, sharpness, auto picture, wide mode,long
life 1, long life 2, external control, videowall
setting, timer operation, dipswitch condition,
power on memory mode, color, system select,
power managment, gray level, ID # setting
Plug & Play DDC1, DDC2B in the case of RGB3,
DDC2B only
Power
Requirements
100-120V 50/60 Hz
Power
Consumption
550
W Typical
Dimensions
(WxHxD)
1214 x 727 x 129 mm, 47.8 x 28.6 x 5.1 inches
Weight
46
kg, 101.4 lbs. (without tabletop stand)
Environmental
Considerations
Operating Temperature 0 to 40 degrees C
Operating Humidity 20-80%
Storage Temperature minus 10 to 50 degrees C
Storage Humidity 10-90%
Warranty
1
Year Parts & Labor Standard
Regulatory
FCC
Classs A, UL1950, CSA950
Included
Accessories
AC
Power Cord, User Manual, Remote Control, Remote Control Cable,
15-pin RGB Cable, Batteries
Optional
Accessories
Tabletop Stand (PX-50VP1U-ST)
MultiScreen Mount Unit (PX-42VP1U-MW)
MultiScreen Support Unit (PX-42VP1U-MW-S)
Fixed Wall Mount Kit (FWMK)
Tilt Wall Mount Kit (TWMK)
Ceiling Mount Kit (CMK)
